Seal-Krete LOCK-DOWN is a self cross-linking epoxy floor bonding primer for concrete surfaces. Its nanotechnology improves adhesion with ultra-fine, nano-sized particles that penetrate deeply into the concrete, while locking down the chalk and providing a clean, sound substrate for a topcoat of paint.
Using Lock-Down will significantly reduce the potential of peeling, cracking, blistering or chipping. Lock-Down improves the spread rate of your topcoat. Unlike most primers, Lock-Down is resin rich and doesn't contain any fillers. Lock-Down is a great primer for any concrete substrate to lock down paint.
Lock-Down is the preferred primer for Seal-Krete Epoxy-Seal, Concrete Colors and Floor-Tex, and improves the adhesion of water-based floor paints, stains and textured coatings.
•
Improves topcoat adhesion by 50%
• Locks paint onto concrete surfaces
• Reduces Hot Tire Pickup
• Low Odor
• Water Clean-Up
• Helps prevent peeling and cracking paint
| Best
for |
Concrete |
| Limitations |
Air and surface temperatures are above 50-90°. Not for 2-part epoxies. Do not use below grade. Do not use as a clear coat or primer for clear coat. Wait 8 hours before topcoating |
| Coverage |
1 gallon covers approx. 150-250 sq .ft. |
| Dry
Time |
Dry to touch 2 - 4 hours. |
| Recoat |
Wait 8 hours before topcoating |
| Color |
Primer goes on amber-colored, but dries clear. |
| Size |
1 gallon |
| Application |
Roll, brush, pump sprayer |
Click here for Full Data Sheet (pdf)
Click here for MSDS (pdf)
| Product Number |
Unit Size |
UPC Code |
Carton
Qty |
Carton
Code |
Carton
Size |
Carton
Size |
Carton
Weight (lbs) |
Pallet Qty
|
| 106001 |
1-gal |
0
15944 10601 5 |
4 |
90015944106018 |
14x14x8 |
.91 cubed |
40 |
45 cases |
|
|
