|
Home
Products
Sealers
Paints & Stains
Cleaners &
Prep
Textured
Coatings
Specialty Products
Convenience Products
|
These
sealers are formulated to protect vertical substrates
from water penetration, provide aesthetic revitalization
and prepare the substrate for painting. Unlike
other waterproofing sealers, SEAL-KRETE Original
and Heavy Duty do not provide beading, but instead
let water fully release from the substrate via
sheeting action.
|
| |
 |
Original
Waterproofing Sealer |
•
For above grade use on vertical surfaces: concrete,
stucco, synthetic stucco, brick, plaster, masonite,
drywall, galvanized metal, vinyl siding, aluminum
siding, adobe, stone, wood fencing
• 10% solids
• Water based, acrylic
• Clear primer
• Bond prep
• Improves paint adhesion
• Strengthens mortar joints
• Reduces efflorescence
• Binds chalky surfaces
• Paintable
• Tintable
• Low VOCs
• Interior / exterior use
• Read label before use
Click
here for more on Original Waterproofing Sealer |
| |
 |
Heavy
Duty Waterproofer |
•
For above grade use on vertical surfaces: especially
low-density or porous concrete and masonry such
as split-face, fluted and decorative block
• 25% High-solids formula
• Water based, acrylic
• Maximum protection – conforms to
ASTM E-514 and other tests for wind-driven rain
• Lowers surface pH on alkaline substrates
• Improves paint adhesion
• Strengthens mortar joints
• Binds chalky surfaces
• Paintable
• Tintable
• Low VOCs
• Interior / exterior use
• Read label before use
Click
here for more on Heavy Duty Waterproofer |
| |
 |
Commercial Grade Waterproofer |
| Commerical Grade Waterproofer is an advanced silconized, acrylic blend designed to stop water from penetrating into bare, porous concrete surfaces such as split-face or fluted concrete block.
It provides a tough, breathable, non-yellowing film that reduces freeze damage and strengthens mortar joints. If added to paint, it improves spread rate and increases water resistance. IMPORTANT: Read all directions thoroughly. Wear gloves and eye protection.
Click
here for more on Commercial Grade Waterproofer |
| |
|
Stucco-Guard
|
| |
 |
Seal-Krete®
Stucco-Guard™ is a premium, low lustre, water-based acrylic sealer that provides a tough, flexible water-resistant film for new or aged stucco surfaces.
Designed to penetrate deep into stucco pores, Stucco-Guard provides protection against color bleeding, premature fading, and mold and mildew growth. Ideal for hurricane/storm-prone areas Seal-Krete Stucco-Guard stops wind-driven rain (up to 124 mph) and helps prevent weather damage from freeze/thaw cycles when applied according to specification.
Click
here for more on Stucco-Guard |
| |
|
|
| |
|
|
|
|
|
